R825.66
High performance damp-proofing cream. Used for the control of rising damp. BBA and WTA approved.
Next-day delivery
30-day return policy
Over 40 years of innovation
Trustpilot rating - Excellent
| Appearance | Thick, white cream |
| Active Ingredients | Silane and Siloxane |
| Size(s) and Packaging | 5 litre plastic bucket, 600 ml foil sausage and 310 ml mastic cartridge |
| Accreditations |
|
Dryzone eliminates rising damp in masonry walls.
The patented and BBA approved cream is simply injected into holes drilled along a horizontal mortar course.
Once cured, the high-performance active ingredient will provide a dampness barrier, making that mortar course into a new damp-proof course.
Dryzone is the most rigorously tested and accredited damp-proofing cream on the market. It has been tested by numerous national and international testing houses:
Laboratory and field testing has also shown that Dryzone outperforms creams by competing manufacturers in walls with either low or high levels of moisture saturation.
The cream comes in both 310 ml mastic cartridges, for isolated areas of damp, or 600 ml foil-wrapped sausages, for large or multiple jobs using the Dryzone Applicator Gun. No special powered pumps or solvent-based chemicals are required.
There is also a range of Dryzone System Tools to help application go smoothly, including the Dryzone Drillbit and Dryzone Hole Clearing Tool.
Dryzone Damp-Proofing Cream is part of the Dryzone System for renovating internal walls suffering from rising damp. This means that it is fully compatible with both Dryzone Renovation Plasters and Dryzone Express Replastering. Full guidance to the use of Dryzone Damp-Proofing Cream and the full system is available in the form of our guidebook, Rising Damp and its Control.
Buy Dryzone Damp-Proofing Cream with confidence that you’re getting the best!
Set your SDS drill to rotary hammer mode and attach the suitably marked drill bit. Identify the lowest horizontal mortar course that is accessible and continuous and at least 150 mm above the outside ground level. Drill holes to the full recommended depth, at regular 120 mm intervals along the wall. As the drill bit approaches the final 40 mm of the intended hole depth, make sure to reduce the pressure to avoid damage to the far side of the wall.
Insert delivery tube of the applicator to the full depth of the pre-drilled hole. Squeeze the gun trigger and back-fill each hole fully with Dryzone Cream to within one centimetre of the hole opening.
