CEMENTITIOUS WATERPROOFING Archives - Welcome to Safeguard

Bondaid Plus

maggie_adminsafe — Mon, 14 Aug 2023 07:16:43 +0000

Package and Weight :
5L = 5kg
25L = 25kg

Bondaid Plus is a styrene-butadiene rubber latex (SBR) which has been specifically designed for use with cement compositions and as a primer to improve bonding.
When incorporated into cement mortar mixes it forms polymer modified
systems which exhibit excellent adhesion,
improved tensile and flexural strength, as well as
resistance to water and water vapour. Bondaid
Plus mixes are non-toxic and can be used with
potable water.

Benefits
• Improves adhesion of slurry coats and

Benefits:
Improves adhesion of slurry coats and
sand/cement mixes
Increases resistance to salt efflorescence
Improves workability
Increases flexibility of cement-based materials
Enhances response to thermal movements

Dimensions:
5L – 13cmx 18cm x 28cm
25L – 25m x 29cm x 48cm

Pack Size:
5L – Drum
25L – Drum

The post Bondaid Plus appeared first on Welcome to Safeguard.

Fillet Seal 5kg

maggie_adminsafe — Mon, 14 Aug 2023 07:39:03 +0000

Package and Weight :
5L = 5kg

RA cement based, rapid curing, non-shrink hydraulic setting powder. Used at points of stress i.e. floor/wall junction and applied and applied normally by trowel.

Areas of Application:
• Wall and Floor joints ( 90° V joints) – Eg.
Basement wall joints, internal wall joints before
apply skirting’s.
• rigid joints between elements in concrete and
precast concrete structures
• Concrete Repair
• Anchoring of steel bars.
Execution of underpinning.

Dimensions:
Bucket: 20cm by 20cm by 25cm

Pack Size:
5kg Bucket

The post Fillet Seal 5kg appeared first on Welcome to Safeguard.

Flexseal Membrane

maggie_adminsafe — Mon, 14 Aug 2023 07:01:02 +0000

200mm x 10m

QUANTITY: 200mm x 10m

COVERAGE: 2m2

VAT: 9.91

1m x 5m

QUANTITY: 1m x 5m

COVERAGE: Per Meter

VAT: 23.22

1m x 10m

QUANTITY: 1m x 10mm

COVERAGE: Per Meter

VAT: 42.39

The post Flexseal Membrane appeared first on Welcome to Safeguard.

Latseal Kit

maggie_adminsafe — Mon, 14 Aug 2023 06:42:37 +0000

Latseal Kit is a cementitious, ready mixed surface water proofer. The waterproofing function is achieved by a pre-mixed unique composition of plastic modified hydraulically setting cement, and selected additives. It can be used against active and passive water pressures.

Area of Application:
Concrete and masonry substrates
• Lateral Damp – wet walls
• Active or passive waterproofing
• Boundary walls, slabs, retaining walls, etc.
• Ponds
• Under tile waterproofing – showers, Balconies
& Terraces

Dimensions:
Bucket – 36cm x 36cm x 38cm

Weight:
21kg

Coverage:
5m2
2 coat application

Item:
20L Bucket
Latseal Kit 16Kg
SG Bonding Liquid 5L

The post Latseal Kit appeared first on Welcome to Safeguard.

Rapid Setting 5kg

maggie_adminsafe — Mon, 14 Aug 2023 07:55:50 +0000

Rapid Setting Plug is a rapid setting,
plugging mortar supplied in powder
form. It is a blend of activating chemicals,
cement and high grade silica aggregates.it
requires only the additions of water and
hardens in a matter of seconds to seal leaks
and even running water. Water flow can be
stopped by mixing the Rapid Setting Plug to a
malleable consistency and using as a plug.

Areas of Application
•Water retaining structures
• Basements
• Lift wells
• Inspection pits
• Tunnels and underground structures
• Joint filling
• concrete tunnel segments and pipes
• Pointing and patching repairs prior to
application of water renders.
• Sinking and securing

Dimensions:
Bucket: 20cm by 20cm by 25cm

Pack Size:
5kg Bucket

The post Rapid Setting 5kg appeared first on Welcome to Safeguard.

SG Bonding Liquid

maggie_adminsafe — Mon, 14 Aug 2023 07:10:37 +0000

Package and Weight:
5L = 5kg
25L = 25kg

SG Bondaid Liquid – Ready to use. Bonding Liquid is a styrene-butadiene rubber
latex (SBR) which has been specifically designed
for use with cement compositions and as a
primer to improve bonding. When incorporated
into cement mortar mixes it forms polymer
modified systems which exhibit excellent
adhesion, improved tensile and flexural strength,
as well as resistance to water and water vapour.
Bonding Liquid mixes are non-toxic and can be
used with potable water.

Dimensions:
5L – 13cmx 18cm x 28cm
25L – 25m x 29cm x 48cm

Pack Size:
5L – Drum
25L – Drum

The post SG Bonding Liquid appeared first on Welcome to Safeguard.

SG Concrete Repair

maggie_adminsafe — Mon, 14 Aug 2023 07:55:52 +0000

SG Concrete Repair is a ready to use powder binder, made up of a blend, of activating chemicals and high grade silica aggregates.it requires only the additions of water and hardens to repairs structures in concrete and masonry.Areas of Application

Sealing Concrete conduits, drains and tanks
Sinking and securing wooden plugs
Stopping water minor leaks in underground structures, cellars and lift wells.
concrete tunnel segments and pipes
Pointing and patching repairs prior to application of water renders.

Benefits

Sets in 3 minutes at +20°C
Easy to use – simply add water
Chloride free – no risk to steel reinforcement
Non- Toxic – suitable for use in potable water systems
Repairs vertical and horizontal substrates
Pre-mixed – giving consistent quality and results
Low shrinkage
Very high mechanical strength after a few hours

Properties

Appearance	Grey Powder
Size(s) & Packaging	5 kg Buckets
Coverage	Per application.
Storage	Store out of direct sunlight, clear of the ground on pallets protected from rain
Pot Life	Approx. 3 minutes
Shelf Life	12 Months

Application Information

Preparation

The substrate must be solid, strong free of oil, dust dirt, paint curing compounds and clean free of all friable material or other contaminants that could impair adhesion. Chase out masonry around holes or cracks to be filled to a depth of at least 25mm. If possible to increase the mechanical bond, form the chase or hole so that it is wider within the wall than at the surface (an inverted “v”). Wet the area be patched immediately prior to application. Never use on a dry substrate. Do not add lime, cement, or gypsum to SG concrete Repair or to leveling or smoothing concrete floors.

Mixing

PREPARING THE MIX
200ml water mixed with 1kg SG Concrete Repair into a container and mix manually with a trowel or float to obtain a smooth mix with no lumps. Preparing large quantities an electric mixer is recommended.

Applying the mix

Securing foundation bolts, hinges, tie-rods, etc.
Completely fill the appropriately prepared cavity with SG Concrete Repair and then insert the hinge, foundation bolt or tie-rod, using a trowel to finish off surface.

Securing sub-frames and window and door frames
Position frame and seal off anchor bolts with SG Concrete Repair, using a trowel to finish off surface and keep frame firmly in position for a few hours.

Stopping small water leaks
After preparing the mix, wait a few minutes before applying it so that the material warms up and begins to cure. At this point, with gloved hands, force SG Concrete Repair into the cavity and keep it pressed down until it has set.

Equipment Care

Clean tools and equipment immediately after use with water. Hardened Raid Setting Plug can only be removed mechanically.

Health & Safety

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin, and foodstuffs. Treat splashes to skin and eyes immediately. If accidentally ingested, seek medical attention. Reseal containers after use.

Other Information

Information given is in good faith based on experience and usage, however all recommendations are made without warranty or guarantee, since the conditions of use are beyond our control. All goods are sold in accordance with our Conditions of Sale, copies of which are available on request. Customers are advised that products, techniques and codes of practice are under constant review and changes occur without notice, please ensure you have the latest updated information.

5Kg

QUANTITY: 5kg

VAT: 62.35

20Kg

QUANTITY: 20Kg

VAT: 240.65

The post SG Concrete Repair appeared first on Welcome to Safeguard.