SG Concrete Repair is a ready to use powder binder, made up of a blend, of activating chemicals and high grade silica aggregates.it requires only the additions of water and hardens to repairs structures in concrete and masonry.

Areas of Application

• Sealing Concrete conduits, drains and tanks
• Sinking and securing wooden plugs
• Stopping water minor leaks in underground structures, cellars and lift wells.
• concrete tunnel segments and pipes
• Pointing and patching repairs prior to application of water renders.

Benefits

• Sets in 3 minutes at +20°C
• Easy to use – simply add water
• Chloride free – no risk to steel reinforcement
• Non- Toxic – suitable for use in potable water systems
• Repairs vertical and horizontal substrates
• Pre-mixed – giving consistent quality and results
• Low shrinkage
• Very high mechanical strength after a few hours

Properties

Appearance Grey Powder Size(s) & Packaging 5 kg Buckets Coverage Per application. Storage Store out of direct sunlight, clear of the ground on pallets protected from rain Pot Life Approx. 3 minutes Shelf Life 12 Months

Application Information

Preparation

The substrate must be solid, strong free of oil, dust dirt, paint curing compounds and clean free of all friable material or other contaminants that could impair adhesion. Chase out masonry around holes or cracks to be filled to a depth of at least 25mm. If possible to increase the mechanical bond, form the chase or hole so that it is wider within the wall than at the surface (an inverted “v”). Wet the area be patched immediately prior to application. Never use on a dry substrate. Do not add lime, cement, or gypsum to SG concrete Repair or to leveling or smoothing concrete floors.

Mixing

PREPARING THE MIX
200ml water mixed with 1kg SG Concrete Repair into a container and mix manually with a trowel or float to obtain a smooth mix with no lumps. Preparing large quantities an electric mixer is recommended.

Applying the mix

Securing foundation bolts, hinges, tie-rods, etc.
Completely fill the appropriately prepared cavity with SG Concrete Repair and then insert the hinge, foundation bolt or tie-rod, using a trowel to finish off surface.

Securing sub-frames and window and door frames
Position frame and seal off anchor bolts with SG Concrete Repair, using a trowel to finish off surface and keep frame firmly in position for a few hours.

Stopping small water leaks
After preparing the mix, wait a few minutes before applying it so that the material warms up and begins to cure. At this point, with gloved hands, force SG Concrete Repair into the cavity and keep it pressed down until it has set.

Equipment Care

Clean tools and equipment immediately after use with water. Hardened Raid Setting Plug can only be removed mechanically.

Health & Safety

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin, and foodstuffs. Treat splashes to skin and eyes immediately. If accidentally ingested, seek medical attention. Reseal containers after use.

Other Information

Information given is in good faith based on experience and usage, however all recommendations are made without warranty or guarantee, since the conditions of use are beyond our control. All goods are sold in accordance with our Conditions of Sale, copies of which are available on request. Customers are advised that products, techniques and codes of practice are under constant review and changes occur without notice, please ensure you have the latest updated information.

5Kg

QUANTITY: 5kg

VAT: 62.35

20Kg

QUANTITY: 20Kg

VAT: 240.65