Waterproofing Additives Archives - Welcome to Safeguard

Bondaid Plus

maggie_adminsafe — Mon, 14 Aug 2023 07:16:43 +0000

Package and Weight :
5L = 5kg
25L = 25kg

Bondaid Plus is a styrene-butadiene rubber latex (SBR) which has been specifically designed for use with cement compositions and as a primer to improve bonding.
When incorporated into cement mortar mixes it forms polymer modified
systems which exhibit excellent adhesion,
improved tensile and flexural strength, as well as
resistance to water and water vapour. Bondaid
Plus mixes are non-toxic and can be used with
potable water.

Benefits
• Improves adhesion of slurry coats and

Benefits:
Improves adhesion of slurry coats and
sand/cement mixes
Increases resistance to salt efflorescence
Improves workability
Increases flexibility of cement-based materials
Enhances response to thermal movements

Dimensions:
5L – 13cmx 18cm x 28cm
25L – 25m x 29cm x 48cm

Pack Size:
5L – Drum
25L – Drum

The post Bondaid Plus appeared first on Welcome to Safeguard.

Renderguard Gold

maggie_adminsafe — Mon, 14 Aug 2023 07:36:07 +0000

Renderguard Gold is a high specification plaster additive that forms an integral part of the Safeguard damp- proofing system.Benefits

Instills salt retardant and waterproofing properties
Reduces water demand
Improves workability
Chloride free
Remains vapour permeable

Properties

Appearance	Yellow/gold liquid
Size(s) & Packaging	5 liter and 25 liter drums
Coverage	1 litre of concentrate is sufficient for 7 m2 of render at 12 mm thickness
Storage	Store in a cool, well ventilated area. Keep container tightly closed. Protect from frost. Store out of direct sunlight
Shelf Life	12 months

Application Information

Preparation

1. Timber skirtings, architraves etc., should be removed a outlined in the survey report/specification.

2. Remove plaster back to masonry to the height specified in the survey report/specification. This height should be no less than 1 metre, or 500 mm above the maximum level of visual rising dampness and/or salt contaminated plaster.

3. Rake out all mortar joints to a depth of 15 mm. This is important in order to help resist the natural shrinkage of new cement renders.

4. Remove any timber fixing grounds that are present in the masonry.

Application

To create the gauging solution, mix 1 part Renderguard Gold with 24 parts water. All water should be fresh, clean and free from oil or other organic contaminants.

First Coat

Prepare 3 parts sand and 1 part cement using the dilute Renderguard Gold solution prepared above. The sand should be specified as washed, sharp sand, loam free which satisfies British Standard BS882:1992 “M” Grading.

Use the minimum Renderguard Gold gauging solution to ensure a dense coat. As a guide, no more than 8 litres should be used for every 50 kg of dry mix. Compact the resulting mix well into raked out joints, and render to give an overall thickness of 12 mm. Do not over-trowel. When the cement achieves a first set, then scratch to form a key.

Second Coat

The mix is as for the first coat except that water is used instead of Renderguard Gold solution. This is applied as a further 12 mm coat, giving a total thickness of 24 mm for both coats. This coat should be applied before the first coat has finally set in order to obtain a satisfactory adhesion between the two coats. Scratch the surface to form a key. Do not over-trowel.

Finishing Coat

This should consist of a 3 mm layer of gypsum skim finish or similar finish. Other finishes are acceptable provided that they are porous. Do not polish.

No decoration should take place for at least 6 weeks after treatment (or until the wall has dried out).

25litre

QUANTITY: 25litre

COVERAGE: 175m2

VAT: 290.22

5litre

QUANTITY: 5litre

COVERAGE: 35m2

VAT: 73.96

The post Renderguard Gold appeared first on Welcome to Safeguard.

SG Bonding Liquid

maggie_adminsafe — Mon, 14 Aug 2023 07:10:37 +0000

Package and Weight:
5L = 5kg
25L = 25kg

SG Bondaid Liquid – Ready to use. Bonding Liquid is a styrene-butadiene rubber
latex (SBR) which has been specifically designed
for use with cement compositions and as a
primer to improve bonding. When incorporated
into cement mortar mixes it forms polymer
modified systems which exhibit excellent
adhesion, improved tensile and flexural strength,
as well as resistance to water and water vapour.
Bonding Liquid mixes are non-toxic and can be
used with potable water.

Dimensions:
5L – 13cmx 18cm x 28cm
25L – 25m x 29cm x 48cm

Pack Size:
5L – Drum
25L – Drum

The post SG Bonding Liquid appeared first on Welcome to Safeguard.