MARITRANS TILE-PRIMER is a transparent, one-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the coating that follows. Solvent based. Cures by reaction with ground and air moisture.


The MARITRANS TILE-PRIMER is mainly used as an adhesion promoter (primer) for MARITRANS transparent polyurethane coatings on non-absorbent glazed surfaces like:

  • Glazed ceramic tiles
  • Glass
  • Glass bricks, etc

The MARITRANS® TILE-PRIMER can also be used in combination with other MARIS POLYMERS polyurethane coatings.


  • Simple application.
  • Excellent anchoring to “difficult” glass and glazed surfaces
  • UV-stable
  • Quick drying


30-80 gr/m2 in one or two layers.
This coverage is based on application by roller onto a smooth surface in optimum conditions. Factors like surface porosity, temperature and application method can alter consumption.


Surface Preparation

Careful surface preparation is essential for optimum finish and durability.
The surface needs to be clean and sound, free of any contamination, which may harmfully affect the adhesion. Old coatings, dirt, fats, oils, organic substances and dust need to be removed. Maximum moisture content should not exceed 5%. Any loose surface pieces and grinding dust need to be thoroughly removed. Do not wash surface with water

Priming (Activation of surface)

For best results, the temperature during application should be between 5C and 35C, and relative humidity should be between50%and 70%. Low temperatures and low humidity retard cure. High humidity may affect the final finish.

Apply the MARITRANS® TILE-PRIMER by soaking a clean and dry cloth, and wipe the entire surface off. Change cloths often. By this application procedure, you ensure that besides the chemical surface activation, the surface is getting also very effectively degreased. Make sure that enough quantity of MARITRANS® TILE-PRIMER is applied on the entire surface without leaving any untreated spots.

After approx. 1-2 hours, apply the MARITRANS or other MARIS POLYMERS polyurethane coating.


MARITRANS® TILE-PRIMER is supplied in 15kg, 5kg and 1kg pails. Pails should be stored in dry and cool rooms for up to9months.Protect the material against moisture, frost and direct sunlight. Storage temperature: 5-30C. Products should remain in their original, unopened containers, bearing the manufacturers name, product designation, batch number and application precaution labels.

Maritrans Tile Primer



also purchased with

    Your Cart
    Your cart is emptyReturn to Shop