QUANTITY: 4L

Advantages

  • Simple application (roller).
  • UV-stable
  • Non-yellowing
  • Abrasion resistant.
  • Gives the surface a satin-matte finish
  • Resistant to water
  •  Maintains its mechanical properties over a temperaturespanof-40oC to +90oC.
  • Resistant to frost
  • Over 10 years of positive feedback worldwide.

Uses
The MARITRANS FINISH is used as a satin- matte,transparent finishing coating in combination with the MARITRANS  for:

  • Transparent waterproofing of Balconies and Terraces
  • Transparent waterproofing of Ceramic surfaces
  • Transparent waterproofing of Glass
  • Transparent waterproofing of Glass-Brick walls
  • Transparent waterproofing and protection of Natural Stones
  • Transparent waterproofing of Transparent Plastics(e.g. Polyacrylate, Polycarbonate)
  • Transparent waterproofing and protection of Wood

Consumption

0,1 kg/m2 in one layers.
This coverage is based on application by roller onto a smooth surface in optimum conditions. Factors like surface porosity, temperature and application method can alter consumption.

Colors

The MARITRANS FINISH is supplied transparent, satin-matte

Technical Data

PROPERTY RESULTS TEST METHOD Composition Polyurethane high-solids pre-polymer Elongation at Break >200% DIN EN ISO527

Tensile Strength >15 N/mm 2 DIN EN ISO527 Adhesion to MARITRANS  coating >1,5 N/mm 2(see application instructions) ASTMD 903 Surface chalking after 2000h of accelerated aging (DIN EN ISO 4892-3, 400 MJ/m2) No chalking observed. Chalking grade 0 DIN EN ISO4628-6 Hardness (SHORE D Scale) 25 ASTMD 2240 Water vapor permeability >8 gr/m2 .24hours EN ISO12572 Resistance to Water Pressures No Leak (1m water column, 24h) DIN EN 1928 Hydrolysis (5% KOH, 7days cycle) No significant elastomeric change Inhouse Lab Service Temperature -40oC to +90oC Inhouse Lab Tack Free Time 4-6 hours Conditions: 20C, 50% RH Light Pedestrian Traffic Time 24 hours Conditions: 20C, 50% RH Final Curing time 7 days Conditions: 20C, 50% RH Chemical Properties Good resistance against acidic and alkali solutions (5%), detergents, seawater and oils.

Application

Surface Preparation

Careful surface preparation is essential for optimum finish and durability.
The surface needs to be clean, dry and sound, free of any contamination, which may harmfully affect the adhesion of the membrane. Maximum moisture content should not exceed 5%. Substrate compressive strength should be at least 25MPa, cohesive bond strength at least 1.5MPa. New concrete structures need to dry for at least 28 days. Old, loose coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding machine. Possible surface irregularities need to be smoothened. Any loose surface pieces and grinding dust need to be thoroughly removed. Do not wash surface with water!

Repair of cracks and joints:

The careful sealing of existing cracks and joints before the application is extremely important for long lasting water proofing results. Clean concrete cracks, hairline cracks, expansion joints and control joints of dust, residue or other contamination. Prime locally with the MARISEAL
 710 Primer and allow 2-3 hours to dry. Fill all prepared cracks and joints with MARIFLEX
 PU 30 sealant. Allow to cure.

Priming (Activation of surface)
See MARITRANS TILE PRIMER Technical Data Sheet

Transparent waterproofing membrane

See MARITRANS Technical Data Sheet.

Finishing

Apply the MARITRANS

 FINISH over the cured MARITRANS polyurethane coating by roller, until all surface is covered. If high usage of the surface is expected, try to apply more product quantity. Do not apply a second layer.

ATTENTION: Apply the MARITRANS  FINISH over the MARITRANS  coating, 12 hours after the application of the last layer. For best results, the temperature during application and cure should be between 5 oC and 35OC. Low temperatures retard cure while high temperature speed up curing. High humidity may affect the final finish.

WARNING: The MARITRANS  coating system is slippery when wet. In order to avoid slipperiness during wet days, sprinkle suitable aggregates onto the still wet coating to create an anti-slip surface. Please contact our R+D Dept. for more details.

Packaging

MARITRANS  FINISH is supplied in 17 kg, 10 kg and 5 kg pails. Pails should be stored in dry and cool rooms for up to9months.Protect the material against moisture and direct sunlight. Storage temperature: 50-300C. Products should remain in their original, unopened containers, bearing the manufacturers name, product designation, batch number and application precaution labels.

Maritrans Finish

Description

QUANTITY:
4L

MARITRANS FINISH is a satin-matte, transparent, semi-rigid, one component, aliphatic polyurethane coating, used for matt finishing over MARITRANS  polyurethane coatings. The MARITRANS  FINISH is UV-stable, non-yellowing, abrasion resistant, alkali and chemical resistant. It gives the surface a satin-matte look.

The MARITRANS  FINISH is using a unique curing system (moisture triggered), and unlike other similar systems it does not react with moisture (moisture-cured) and does not form bubbles.

Recently Viewed Products

No recently viewed products to display

also purchased with

0
    0
    Your Cart
    Your cart is emptyReturn to Shop