25litreQUANTITY: 25litre

COVERAGE: Dilutes to 125L

VAT: 299.87

5litre

QUANTITY: 5litre

COVERAGE: Dilutes to 25L

VAT: 24.39

The post Bondaid Plus appeared first on Welcome to Safeguard.

25litreQUANTITY: 25litre

VAT: 106.17

5litre

QUANTITY: 5litre

VAT: 24.39

The post SG Bonding Liquid appeared first on Welcome to Safeguard.

Renderguard Gold is a high specification plaster additive that forms an integral part of the Safeguard damp- proofing system.Benefits

• Instills salt retardant and waterproofing properties
• Reduces water demand
• Improves workability
• Chloride free
• Remains vapour permeable

Properties

Application Information

Preparation

1. Timber skirtings, architraves etc., should be removed a outlined in the survey report/specification.

2. Remove plaster back to masonry to the height specified in the survey report/specification. This height should be no less than 1 metre, or 500 mm above the maximum level of visual rising dampness and/or salt contaminated plaster.

3. Rake out all mortar joints to a depth of 15 mm. This is important in order to help resist the natural shrinkage of new cement renders.

4. Remove any timber fixing grounds that are present in the masonry.

Application

To create the gauging solution, mix 1 part Renderguard Gold with 24 parts water. All water should be fresh, clean and free from oil or other organic contaminants.

First Coat

Prepare 3 parts sand and 1 part cement using the dilute Renderguard Gold solution prepared above. The sand should be specified as washed, sharp sand, loam free which satisfies British Standard BS882:1992 “M” Grading.

Use the minimum Renderguard Gold gauging solution to ensure a dense coat. As a guide, no more than 8 litres should be used for every 50 kg of dry mix. Compact the resulting mix well into raked out joints, and render to give an overall thickness of 12 mm. Do not over-trowel. When the cement achieves a first set, then scratch to form a key.

Second Coat

The mix is as for the first coat except that water is used instead of Renderguard Gold solution. This is applied as a further 12 mm coat, giving a total thickness of 24 mm for both coats. This coat should be applied before the first coat has finally set in order to obtain a satisfactory adhesion between the two coats. Scratch the surface to form a key. Do not over-trowel.

Finishing Coat

This should consist of a 3 mm layer of gypsum skim finish or similar finish. Other finishes are acceptable provided that they are porous. Do not polish.

No decoration should take place for at least 6 weeks after treatment (or until the wall has dried out).

25litre

QUANTITY: 25litre

COVERAGE: 175m2

VAT: 290.22

5litre

QUANTITY: 5litre

COVERAGE: 35m2

VAT: 73.96

The post Renderguard Gold appeared first on Welcome to Safeguard.

SG Concrete Repair is a ready to use powder binder, made up of a blend, of activating chemicals and high grade silica aggregates.it requires only the additions of water and hardens to repairs structures in concrete and masonry.Areas of Application

• Sealing Concrete conduits, drains and tanks
• Sinking and securing wooden plugs
• Stopping water minor leaks in underground structures, cellars and lift wells.
• concrete tunnel segments and pipes
• Pointing and patching repairs prior to application of water renders.

Benefits

• Sets in 3 minutes at +20°C
• Easy to use – simply add water
• Chloride free – no risk to steel reinforcement
• Non- Toxic – suitable for use in potable water systems
• Repairs vertical and horizontal substrates
• Pre-mixed – giving consistent quality and results
• Low shrinkage
• Very high mechanical strength after a few hours

Properties

Application Information

Preparation

The substrate must be solid, strong free of oil, dust dirt, paint curing compounds and clean free of all friable material or other contaminants that could impair adhesion. Chase out masonry around holes or cracks to be filled to a depth of at least 25mm. If possible to increase the mechanical bond, form the chase or hole so that it is wider within the wall than at the surface (an inverted “v”). Wet the area be patched immediately prior to application. Never use on a dry substrate. Do not add lime, cement, or gypsum to SG concrete Repair or to leveling or smoothing concrete floors.

Mixing

PREPARING THE MIX
200ml water mixed with 1kg SG Concrete Repair into a container and mix manually with a trowel or float to obtain a smooth mix with no lumps. Preparing large quantities an electric mixer is recommended.

Applying the mix

Securing foundation bolts, hinges, tie-rods, etc.
Completely fill the appropriately prepared cavity with SG Concrete Repair and then insert the hinge, foundation bolt or tie-rod, using a trowel to finish off surface.

Securing sub-frames and window and door frames
Position frame and seal off anchor bolts with SG Concrete Repair, using a trowel to finish off surface and keep frame firmly in position for a few hours.

Stopping small water leaks
After preparing the mix, wait a few minutes before applying it so that the material warms up and begins to cure. At this point, with gloved hands, force SG Concrete Repair into the cavity and keep it pressed down until it has set.

Equipment Care

Clean tools and equipment immediately after use with water. Hardened Raid Setting Plug can only be removed mechanically.

Health & Safety

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin, and foodstuffs. Treat splashes to skin and eyes immediately. If accidentally ingested, seek medical attention. Reseal containers after use.

Other Information

Information given is in good faith based on experience and usage, however all recommendations are made without warranty or guarantee, since the conditions of use are beyond our control. All goods are sold in accordance with our Conditions of Sale, copies of which are available on request. Customers are advised that products, techniques and codes of practice are under constant review and changes occur without notice, please ensure you have the latest updated information.

5Kg

QUANTITY: 5kg

VAT: 62.35

20Kg

QUANTITY: 20Kg

VAT: 240.65

The post SG Concrete Repair appeared first on Welcome to Safeguard.

The post Latseal Kit appeared first on Welcome to Safeguard.

The post Shower kit appeared first on Welcome to Safeguard.

The post Rapid Setting 5kg appeared first on Welcome to Safeguard.

QUANTITY: 5kgCOVERAGE: 4 meters

The post Fillet Seal 5kg appeared first on Welcome to Safeguard.